5.1.4
Display Functions
In normal weighing mode the displays have the following functionalities:
-
Display-Weight shows the actual weight value with the selected unit.
-
Display-PW shows the actual piece weight with the gram or ounce.
-
Display-Count shows the calculated number of pieces with unit pcs.
The "Charging" Symbol
is only shown on the Display-Weight if there is an ACC
connected.
The "Weighing" Symbol
is only shown on the Display-Weight.
If there is only one scale the "Weighing" Symbol is dark. Only if two scales are the
"Weighing" Symbol is visible on Display-Weight!
5.1.5
Digit
One "d" represents the lowest displayable weight value.
For example d = 0,02g → 2d = 0,04g → 3d = 0,06g
5.1.6
Unloaded Scale
A scale is unloaded generally when the weight on the pan is below 2d (<2d).
5.1.7
Enter Values
Values can be entered via the key pad and are shown on the Display-Count.
All inputs starts with a dark display and on the right side with a blinking under line
(cursor) at the last digit. The input can be corrected via the
Button which deletes the
last digit of the input.
The
decimal button as first input Character is also alternatively allowed. Then the
software added the zero before the decimal point automatically.
5.1.8
Initializations
During any initialization process an activation of the menu isn’t possible!
5.1.9
Active Applications for the first start up
For the very first start of the device the applications "Weighing" and "Totalization" are
activated automatically and Checkweighing is OFF.
5.1.10
Two scales
A second platform can be connected to realize a counting system consisting of a
reference scale and a scale for larger quantities.
Each scale has a separate serial number with 13 characters.
Number design:
-
Serial number of Weighing scale 1: W1 38457989
-
Serial number of Weighing scale 2: W2 38457989
Printed is:
SERNO: W1 38457989
SERNO: W2 38457989
Compact Scale Puro® Count
5 Operation
EN-16
Minebea Intec
