2. Safety instructions | 2.4 - Before operational startup | 10
2.4 Before operational startup
NOTICE
Visual inspection!
Before operational startup as well as after storage or transport, inspect the
product visually for signs of mechanical damage.
The device should not be put into operation if it displays signs of visible
damage and/or is defective.
2.4.1 Installation
The device is designed for mounting rail installation (35 mm, as per
DIN 46277).
The device has to be installed in an EMC-compliant manner, see
Chapter
.
To ensure proper cooling of the device, make sure air circulation around the
device is not blocked. Avoid exposing the instrument to excessive heat, e.g.
from direct sunlight and vibrations. The ambient conditions specified in Chap
ter
must be observed at all times.
With outdoor mounting, make sure that adequate weather protection is pro
vided (for temperatures, see Chapter
).
2.4.2 Use in Ex zones
The indicator PR 5215 may not be used in potentially explosive atmospheres.
2.4.3 Opening the device
WARNING
Working on a device that is switched on can have life-
threatening consequences.
When removing covers or parts using tools, live parts may be
exposed. Please note that capacitors in the device may still be
charged even after disconnecting the device from all voltage
sources.
The device may only be opened by skilled service personnel in
accordance with Minebea Intec specifications.
Disconnect the device from the electrical supply.