3. Device description | 3.2 - Overview of the device | 23
3.2 Overview of the device
–
Accuracy 6,000 d (Class III) for the weighing electronics
–
High-speed conversion with response times from upto 10 ms
–
Weight display with status and mass unit on a TFT Color touch display
–
Digital filter with adjustable characteristic line
–
Electrically isolated interfaces
–
3 programmable pairs of limits
–
Supply voltage connection U
DC
= 24 V
–
Connection via plug connector for load cells, inputs and outputs, serial in
terfaces
–
Ethernet connection
–
The device is snapped to a mounting rail.
The menu-guided adjustment and configuration of the device are carried out
on a notebook/PC via ethernet.
–
Adjustment using weights according to the mV/V method or directly us
ing load cell data (SMART calibration)
–
Analog output 0/4 to 20 mA, configurable for gross/net weight (only PR
5215/10 and ../11)
–
Analog weight value via field bus
–
3 digital inputs, electrically isolated
–
3 digital outputs, electrically isolated
–
Overwrite protection:
via CAL switch (on the front of the device)
3.2.1 Communication protocols
For RS-485:
–
Remote display protocol
–
SMA protocol
–
ModBus-RTU protocol
Field bus slave:
–
ProfiBus‑DP
–
DeviceNet
–
CC‑Link
–
ProfiNet I/O
–
EtherNet/IP
–
EtherCAT
