6. Operating | 6.3 - WEB menu | 79
Adjustment
·
–
New
–
Max. capacity
Input: Weight value with decimal place, mass unit
–
Scale interval
Selection: corresponding value
–
Dead load
Selection: By load, By mV/V
–
Adjusted at
Selection: By load, By mV/V, By LC data
–
Modify
–
Dead load
Selection: By load, By mV/V
–
Adjusted at
Selection: By load, By mV/V, By LC data
–
By LC data
–
Number of loadcells
Selection: 1…8
–
Max. capacity of loadcell
Input: Max. capacity E
max
of one load cell
–
Gravity
Input: Gravity at the place of installation; default is the value for
Hamburg, Germany: 9.81379 m/s
2
–
Hysteresis error
Selection: not specified, specified
–
Correction A
Only by selection "specified"
Input: from the calibration certificate of the load cell under
"Hysteresis Correction A"
–
Correction B
Only by selection "specified"
Input: from the calibration certificate of the load cell under
"Hysteresis Correction B"
–
Certified data
Selection: All load cells same, Each load cell specific
–
LC output at max. capacity
Only by selection "All load cells same"
Input: from the calibration certificate of the load cell under "Output at
max. capacity"
