Menu item
Selection
Description
[0 mA]
Set output to 0 mA.
[4 mA]
Set output to 4 mA.
[20 mA]
Set output to 20 mA.
[Output on error]
[hold]
The last output value is held.
[0 mA]
Set output to 0 mA.
[4 mA]
Set output to 4 mA.
[20 mA]
Set output to 20 mA.
[Output if < 0]
[linear]
The output drops below 4 mA down to the limit (at
4
20 mA).
[0 mA]
Set output to 0 mA.
[4 mA]
Set output to 4 mA.
[20 mA]
Set output to 20 mA.
[Output if > Max]
[linear]
Output increases above 20 mA until the limit is re-
ached.
[Weight at 0/4 mA]
Weight value for 0/4 mA output.
[Weight at 20 mA]
Weight value for 20 mA output.
Quit the menu and save parameters by pressing
.
Note:
Adapting the analog output, see Chapter
.
7.18 System information
This menu displays system information.
You can also check inputs and outputs, see Chapter
Note:
also has other functions; see Chapters
and
.
Press
to access the menu.
7 Commissioning
X3 Process Indicator PR 5410
EN-239
Minebea Intec
