F 1.00.00.
Firmware version
Automatic display test
Weight display
Error6
Error message: no sense voltage, see also Chapter
Error9
Error message: if there is no communication with the xB-
PI scale (see also Chapter
Error message: unable to read weight values from the
ADC (analog-digital converter); see also Chapter
The weight display appears.
Set the date and time after turning on the device for the first time; see Chapter
.
7.2.1
Setting the date and time
Entering the date and time via Notebook/PC (VNC/WEB browser)
See Chapter
.
Entering the date and time using the front-panel keys
1.
Press
.
SEtuP
appears on the display.
2.
Press "OK."
Cd 000
appears on the display ("Cd" flashes).
3.
Press
repeatedly (9×) until "dt 086" appears.
4. Press "OK."
YEAr
appears on the display.
5.
Press "OK."
2007
(YYYY) is displayed.
6. Use
/
and
/
to make changes accordingly.
7.
Press "OK."
dAtE
appears on the display.
8. Press "OK."
05/15
(MM/DD) appears on the display.
9. Use
/
and
/
to make changes accordingly.
10. Press "OK."
tIME
appears on the display.
X3 Process Indicator PR 5410
7 Commissioning
Minebea Intec
EN-122