-
The "EasyFill" application allows for quick and reliable filling and emptying of vessels
(for functional description, see Chapter
-
Analog test for the weighing electronics
-
Overwrite protection using CAL switch on the main board
3.2.1
Communication protocols
For the internal RS-232 or external RS-232 + RS-485 (accessories):
-
Remote display protocol
-
Printer
-
ModBus-RTU (slave)
-
SMA protocol
-
xBPI protocol
-
EW-Com protocol
Fieldbus slave (accessories):
-
PR 1721/31 ProfiBus-DP
-
PR 1721/32 InterBus-S
-
PR 1721/34 DeviceNet
-
PR 1721/35 CC-Link
-
PR 1721/36 ProfiNet I/O
-
PR 1721/37 EtherNet IP
For the internal LAN:
-
ModBus-TCP
-
Ethernet TCP/IP
-
OPC
3.3
Housing
3.3.1
General information
The device has an aluminum housing with IP65 front. It can also be used as a control
cabinet version.
The keypad and the display form one unit with the front. A rectangular cut-out is required
for the installation. Cable connections are made at the back of the housing.
The ambient conditions specified for the device must be observed (see Chapter
).
Openings for max. 2 plug-in cards are sealed by dummy plates.
X3 Process Indicator PR 5410
3 Device description
Minebea Intec
EN-16
