7.15.3
Parameters for the xBPI-weighing function
The following parameters must be entered for this menu item:
-
Timeout for tare function depending on the application
-
SBN-address for each xBPI-scale in bus operation mode
-
Serial number of the xBPI-scale or weighing mode with legal-for-trade application
4. If necessary, change the parameters. Only the "baudrate" and "stop bits" can be set
for an xBPI scale.
5.
Press
to exit the menu and to save the settings.
1.
Select
-[Weighing point]- [xBPI-Scale] and confirm.
2.
Press the [Config] softkey.
X3 Process Indicator PR 5410
7 Commissioning
Minebea Intec
EN-180
