Save the data with [Yes].
Press [No] to exit the menu without changing data.
If a printer has been connected and set up (see Chapter 7.17.1.1), the configuration
printout can be triggered via the
and
keys (clicked one after the other).
7.17.5
Fieldbus parameters
The fieldbus parameters are set under this menu item.
Open the menu via
-[Fieldbus parameter].
This menu item can only be selected if a fieldbus card is installed.
The protocol displayed automatically depends on of the installed fieldbus card:
-
[ProfiBus-DP] for PR 1721/31
-
[InterBus-S] for PR 1721/32
-
[DeviceNet] for PR 1721/34
-
[CC-Link] for PR 1721/35
Note:
This fieldbus card does
not
support the "EasyFill" application.
-
[ProfiNet I/O] for PR 1721/36
-
[EtherNet-IP] for PR 1721/37
Example:
PR 1721/36 ProfiNet I/O
X3 Process Indicator PR 5410
7 Commissioning
Minebea Intec
EN-220