[BCD out]
Output as BCD with max. 5 decades plus preceding sign and state
Selection: Gross, Net if tared (net weight if tared, otherwise gross weight), Selected (gross
or net weight depending on SPM bit X72), Transparent (value in D20 is output as BCD)
7.17.10
Configuring analog output
The weight value of the weighing point is transmitted to the output.
Define the parameters for the analog output under
-[Analog output parameter].
The analog output can be configured according to the table below.
Parameter table
Menu item
Selection
Description
[no output]
Analog output is unused.
[Gross D08]
Output of the gross weight.
[Net if tared D09]
Output of the net weight, if tared; otherwise gross
weight
[Selected D11]
Output of the gross/net value on the display, de-
pendent on SPM bit X72.
[Analog mode]
[Transparent D30]
Output of the value in D30
[0
20 mA]
Output of 0
20 mA.
[Analog range]
[4
20 mA]
Output of 4
20 mA.
X3 Process Indicator PR 5410
7 Commissioning
Minebea Intec
EN-238
