8.4.4
Configuring printout
The printout is configured under the [Configuration printing] menu item.
8. Press the [Yes] softkey to save the changes.
1.
Select [Configuration printing] and confirm.
The configuration window appears.
2.
Select [Number printouts], enter the number of printouts between 1
10, and confirm.
3.
Select [Sequence number], change the sequence number if necessary, and confirm.
4. Select [Use NLE]. Check the ☑ box to activate printing with NiceLabelExpress.
5.
Select [Line 1]
[Line 6] and confirm.
A selection window opens.
X3 Process Indicator PR 5410
8 Production
Minebea Intec
EN-262