9
Extended functions
9.1
Hardware test
9.1.1
Display test
9.1.2
Front-panel key test
9.1.3
Serial interfaces
9.1.3.1
RS-232 interface
Open the menu with
- [HW-Slots].
1.
Press
.
2.
Press
2×.
dSP.tSt.
appears on the display.
3.
Press OK.
When no key has been pressed for 5 seconds, the test ends automatically.
The device goes back to the weight display.
Operate all display elements.
1.
Press and hold
and also press
.
A number is displayed for each key. The number increases by 1 each time a key is
pressed.
0.0.0.0.0.0.
2.
For example, press
.
0.0.0.1.0.0.
appears on the display.
3.
For example, press
and
at the same time.
When no key has been pressed for 5 seconds, the test ends automatically.
The device goes back to the weight display.
-8023-
appears on the display.
9 Extended functions
X3 Process Indicator PR 5410
EN-265
Minebea Intec