User Manual of DH-300/400 Full Automatic Soldering Robot
37
Display status of nixie tube:
Display the function item number
Before adjustment
After adjustment
OK
To execute the reset operation during function setting operation:
Reset (Cancel the current operation and return)
If the automatic delay operation function is set in the function setting, to
let the equipment not be in the state of continuous automatic delay
operation, it is necessary to press “Reset” button during the track operation
process of the equipment. Then the equipment exits the automatic
operation status to execute the reset action. After reset, the setting of
function number, etc. can be carried out again.
9.
Y-axis positioning correction distance: (i.e. Y-axis positioning
distance after each axis returns to the reference point when
the task running is finished)
Operation process:
Function
X→: Select the function No. 9
OK (Enter)
X←, X→, Y↑, Y↓, Z↑, Z↓: Adjust
the parameter; X← and X→
represent plus or minus 1, Y↑ and
Y↓ represent plus or minus 10, Z↑
and Z↓ represent plus or minus
100, the maximum value of the
parameter
is
the
maximum
