User Manual of DH-300/400 Full Automatic Soldering Robot
2
Precautions
Please read the following safety precautions to prevent this product or any other
products connected with it from being damaged. In order to avoid possible
dangers, this product can be only used in the specified range.
Use proper power cord:
Only use the dedicated power cord provided
with this product. Before use, check the power cord to confirm there is no
damage or electric leakage.
Product grounding:
This product is grounded through the power cord.
Use the power socket with reliable grounding wire.
Do not pull out or insert the serial port connected with the computer
and the programmer when the machine is powered on.
Please keep the product surface clean and dry, and do not operate it in
an environment which is humid or has corrosive gas.
Do not put articles on the machine.
Please turn off the power supply after use.
The size of components to be welded shall meet the movement index
of this product.
Do not use the serial port line of the handheld programmer to connect
PC; otherwise PC may be damaged.
Do not disassemble the machine without authorization to avoid the
risk of electrical shock.
