User Manual of DH-300/400 Full Automatic Soldering Robot
5
1.1 Product Functions and Characteristics
1.
X, Y and Z axes can make two-dimensional and three-dimensional
motion;
2.
This product is capable of welding at the operating point and drag
soldering;
3.
Three-dimensional displacement is controlled by the precision stepping
motor, so that positioning accuracy and repeated positioning accuracy are
high;
4.
With CAD Graphics recognition, teaching is simplified and track is more
accurate;
5.
This product has compact sealing structure, reasonable layout and higher
cost performance;
6.
This product is more convenient to operate and use with the handheld
programmer, and the track storage number is up to 120;
7.
Welding time and track running speed can be adjusted by programming;
8.
With three-axis fine tuning operation, teaching point coordinates are more
accurate;
9.
According to the principles of ergonomics, the worktable height is
optimized to be 135mm, so as to more meet the operation process of
workers and reduce the workers’ feeling of fatigue;
10. According to users’ requirements, specially designed soldering iron
clamps of adjustable height and angle etc. can be equipped;
11. Different tin feeding systems can be equipped according to soldering tin
diameters;
12. Soldering bit temperature, tin feeding speed, tin feeding volume and tin
return volume can be adjusted;
13. The tin feeding wheel and the tin breaking wheel in the tin feeder can be
interchanged.
14. This product has the function of alarm display.
