User guide P9-0151-B
58 of 64
Version 3.0.4 - 2017
Medema A/S
Problem
Possible causes
Remedy
The “ready” lamp on the
charger does not light up
even though the charger
has been on for 10-12
hours.
There has been a power
cut.
The charger is doing a
top-up charge.
There is a problem with
the batteries.
There is a fault in the
charging plug for the Mini
Crosser M1 Cabin.
Reconnect the charger
and repeat the charging
process.
Check again half an hour
later.
Contact supplier.
Push the charging plug all
the way in and repeat the
charging process. Read
the operating instructions
for the charger.
The “ready” lamp on the
charger lights up even
when partly discharged
batteries are connected.
The fuse in the charger
has blown.
The switch in the charging
plug is malfunctioning.
Contact supplier.
Contact suppliers - read
the operating instructions
for the charger.
The charger lamp is sho-
wing an error.
The charging plug has not
been inserted or there is a
mains fault.
The battery voltage is too
low for charging to start.
Push the charger plug in
or contact the supplier.
Read the operating in-
structions for the charger
- or contact the supplier.
The heater doesn’t work.
Need paraffin/diesel.
The fuse has blown
Put on paraffin og diesel.
Change the fuse.
Read the Webasto user
guide for more informa-
tion.
The washer doesn’t work.
Washer fluid i missing.
The fuse has blown.
Put on washer fluid.
Change the fuse.
The windscreen wiper
doesn’t work.
The fuse has blown.
Change the fuse.
