User guide P9-0151-B
47 of 64
Version 3.0.4 - 2017
Medema A/S
Introduction to the Ergo Standard seat
Adjusting the angle of the
armrest
The adjusting screw makes it
possible to alter the angle of
the armrest by about 15°.
The arm can be folded right
up to make it easier to get in
and out.
(Height adjustment of the arm-
rest is an optional extra.)
Lever for seat rotation
To release the seat, the handle is
tilted up. The seat can be rotated
90° to each side, with stops every
45°.
The lever is spring loaded and
the seat locks automatically when
the lever is released.
Lever for seat forward / back
To release the seat on the slide
rails, pull the lever up.
Then the seat can be moved
forward or back as required.
This lever is located by default in the right, but can also be placed
on the left side.
When the lever is released, the seat automatically locks at the
nearest stop.
The slide rail is fitted with a barrage on the front and rear.
