- 15 -
Mini Crosser A/S
Apart from checking the tyre pressure (air-fi lled tyres), checking the wear and tear of tyres and
charging the batteries, your Mini Crosser scooter requires virtually no maintenance at all. Keep it
in good general condition, and keep the control console, charging socket and electronic box under
the seat free of moisture.
Wheels that cannot be punctured are available at an extra price.
To make sure your Mini Crosser is in safe condition, we recommend the following regular
checks:
Once a day:
1.
Check the indicators and lights before using your Mini Crosser in the dark or in poor
light
conditions.
Once a quarter:
1.
Check the brake release/engine freewheel mechanism.
When the freewheel lever is pushed back, it should be impossible to push your Mini
Crosser.
2.
Check the brake release mechanism.
When the brake release lever is pushed forwards, the battery indicator should fl ash to
indicate a defect when your Mini Crosser is switched on. It should be impossible to drive
your Mini Crosser now even when the throttle is activated.
3.
Check the handbrake.
Activate the handbrake for a few seconds at low speed. This ensures that the rocker arm
and brake blocks do not get jammed.
4.
Lubricate the rocker arm on the front brake hub using acid-free oil.
Safety inspection:
For reasons of safety your Mini Crosser is designed for 10 years of use (but no more than 5,000
hours), providing that it passes a safety test every year (corresponding to 500 hours of use). Servi-
cing must be carried out by an authorised workshop.
IMPORTANT! For safety reasons it is of the utmost importance that the servicing and safety check
intervals are complied with as this minimises the risk of brake failure and short-circuits in the wi-
ring with possible heat generation and fi re to follow.
SECTION 5 MAINTENANCE
