- 30 -
Mini Crosser A/S
Lever for rotating the seat:
Pull the lever back to release the seat. The seat can now be ro-
tated 90° degrees to each side, stopping every 45° degrees. The
lever is on a spring mechanism, and the seat locks automatically
when the lever is released. The lever is normally located on the
right-hand side, but can also be placed on the left-hand side.
Section 11A
Instructions/KAB seat
Lever to move seat forwards/backwards:
In order to release the seat on the slide rail, pull the lever out
and up. The seat can then be pushed forwards or backwards as
required. When you release the lever the seat stops automatically
at the nearest stop point. A backstop is mounted at the front and
back of the slide rail.
Setting the angle of the armrest:
At the end of the armrest (underneath) there is a setscrew as
shown in the photo. This setscrew can be used to set the angle of
the armrest. The armrest can be folded up completely to make it
easier to get on/off the scooter (height adjustment of the armrest
is available as an extra accessory).
Setting the angle of the backrest:
Pull the lever up to adjust the angle of the backrest (vertical
position plus/minus 30° degrees).
NB!
In order to retain stability the backrest must not be reclined
more than 25° degrees during driving. The KAB seat can be
fi tted with a neck rest.
SECTION 11 SEAT INSTRUCTIONS
