OPERATING THE HIGH DEFINTION SUNGLASSES
IMPORTANT NOTICE: Allow the device to charge 8 – 12 hours before
using. Do NOT charge for more than 12 hours.
HOW TO CHARGE THE SUNGLASSES
1.
Plug the USB cable into the USB port on the sunglasses
2.
Plus the USB cable into the USB port on your PC
While charging, the red indicator light is on
When fully charged, the blue indicator light is on
HOW TO TURN ON THE SUNGLASSES
1.
Push and hold the Power Button for 2 seconds
The blue indicator light will turn on
The sunglasses are now in
standby mode
If you do not use the sunglasses for one minute, the
sunglasses will automatically shut off
HOW TO RECORD VIDEO
1.
Put the sunglasses into
standby mode
2.
Push and hold the Power Button for 3 seconds
The blue indicator light with blink 3 times and then
turn off
The sunglasses are now recording live video
3.
Push the Power Button
The red indicator light will blink 3 times
The sunglasses have now shut down
HOW TO TAKE A PHOTOGRAPH
1.
Put the sunglasses into
standby mode
2.
Push the Power Button
The blue indicator light will blink once
The sunglasses have taken a photograph
HOW TO RESET THE TIME AND DATE STAMP
1.
Plug the device into your PC using the USB cable
2.
Turn on the device
3.
Locate “Removable Disk” inside the (My) Computer folder
Go to Start > Computer > Removable Disk
4.
Open the Removable Disk drive
5.
Right click with your mouse
6.
Scroll down to “New”
7.
Click “Text Document”
8.
Rename “New Text Document” as “time”
The title must be in all lowercase letters!
Before Step 8
