4
Version 1.0
OPERATING THE CAMERA
GETTING STARTED
1.
Plug the camera in using the provided
Micro USB cable and AC Adapter.
2.
Make sure a compatible microSD card is
inserted into the unit.
3.
Once you device is plugged in, press the
A button on the remote one time. The
device will beep indicating that it is
powered on.
NOTE: When the device powers on, it
immediately enters into motion detection
mode.
4.
To save any active recordings and return
to standby mode, press the D button on
the remote. You will hear 2 short beeps
indicating the device has left motion
