Updated 05/21/2020 8
Version 1.4
1.
With the bottom cover removed, turn
the On/Off/Mode switch to the voice
activation recording position (see page 4
– where the two dots are cut out of the
bottom).
a.
After about 3 seconds, the red
indicator light will blink.
b.
The device is now ready to
record when it detects voices.
2.
To stop voice activated mode, turn the
On/Off/Mode switch into the stop
position (see page 4 – middle position).
a.
The device has exited voice
activated mode, and has saved
the audio file.
HOW TO USE LONG RECORDING
Long play is used while the device is plugged
into your PC, allowing you to record for a long
time.
Summary of Contents for OmniLAudio
