MiniacRC
[ 11 ]
FUSELAGE INTERNALS
Parts) powerpod, firewall, nose box, nose box flaps, powerpod sleeve, formers A through F, tabs,
fuselage box, receiver plate, belly plate, stringers A and B, formers M, N, O and R, vertical
stabilizer plate
Glue together the powerpod using A-folds. The pod for this Mustang has
2.5
degrees of
rightward thrust angle and
1
degree of downward angle. Glue on the firewall and secure it with
packing tape.
Glue together the nose box with B-folds. Attach the flaps under the nose box, with the leftmost
piece on the plans being placed at the front side. Each flap should sit as far forward as possible,
leaving enough space for the former that will slide into the groove behind it.