Operating the Smart 4
To prepare the system for operation:
1. Connect the cables to the front panel.
2. Connect the cables to the back panel.
3. Switch on the computers.
Switching between computers
There are two ways to switch between computers.
1. On the front panel of the Smart 4, press the button to
switch to the next computer.
2. On the keyboard:
To switch to the next computer forwards press
Shift
then, +. Release
Shift
, before pr.
To switch to the next computer backwards press
Shift
then, -. Release
Shift
, before pressing -.
Note!
With a US English keyboard you can use the
+
key of
the alphanumeric section or of the numeric keypad. With a
Non-US English keyboard only use the
+
key of the numeric
keypad.
When switching computers the illuminated LED of the
bottom bank indicates which computer is currently selected.
8
