9. Storage
• Remove the water from the container and let dry the water pump
• Before a long time storage, remove filters from the cartridge
• Let the purge valve open
• Place the MiniComp on a flat surface
• Do not store the products next to gas, oils an chemical products
• Do not store the products in a dusty or sandy place
• The flexible hose must be free of any stress
10. Filtration and maintenance
• Store the MiniComp, the active coal filters and molecular sieves in a dry place, protected from light b5 °C (41
°F) and +35 °C (95 °F)
• The good functioning and the good preservation of your device do not depend on its frequency of use. A bad storage
may damage its working
• Filters must be changed every complete filling. Otherwise you will degrade the quality of the compressed air
along with the health of the user(s)
• The mix of molecular sieve and coal filter must be placed in the big tank of the cartridge, without disturb the cartridge
locking
• Throw out the mix of molecular sieve and coal filter after its use - choose the recycling bin
• Change the oil of the MiniComp 1 month after the first use, then every 6 months or 100 uses, or if the oil has
darkened,
unscrew the oil tank tap in order to remove the oil
- choose the recycling bin
• Demand specific oil and new filters, necessary for the good working of the equipment and for the air quality
• Replace the water of the container as much as possible with cold freshwater, every 5 or 10 uses
• If the surpression disc is triggered, unscrew the screw, change the metallic tablet then put back the screw
• Prefer the replacement of a defective part by a original part
• Do no attempt to repair an element by yourself
• Do not forget that your security and the good working of your device is linked to its maintenance
• In case of suspicion of a dysfunction, unplug the MiniComp and contact your deal
11. Warranty
• The equipment is guaranteed for one year starting from the date of purchase of the products
• The guarantee is only valid for the first owner of the equipment
• In case of claim for guarantee, you must have a proof or purchase delivered by your dealer
• This guarantee is only valid for « defective » pieces due to a manufacturing fault
• A non-followed maintenance can engender a guarantee cancellation
• The guarantee does not cover the damages caused by a faulty use or by carelessness like it is said in this present
document
• The guarantee does not take in charge the « normal » fatigue of the products
• The guarantee is invalidated if the equipment has been disassembled in a different way from this guide
• In a case of modification of the product by a qualified person, he or she undertakes the responsibility of the repairs/
changements done on the product
• The guarantee is available for the repair or the replacement of a piece by MiniDive, the freight charges and the packing
costs are on the buyer
• The exchanged pieces are MiniDive's goods, these new replaced pieces cannot extend the guarantee of the product in
any case
• The responsibility resulting from the sale is limited to the described guarantee above. It excludes the possibility to use
penalties, damages and interests
• The rules is apt to change according to the territories at a later writing date of the manual, an adaptation can be
necessary
• Every modification of the product involves the loss of the guarantee and can involve risks during the use
• Do not interchange the pieces between other equipments or your guarantee can be cancelled
• To benefit from the guarantee, please contact your dealer
10
Summary of Contents for MiniComp
Page 9: ...9...
