mi niDSP Ltd, Hong Kong /
/ Features and speci fi cations subject to change wi thout pri or noti ce
28
The input channels are low pass filtered in the
LPF
blocks, and then summed into a combined low-frequency
signal. The controls for each
LPF
block are similar to those seen in the
Xover
blocks in the output channels, but
only have a single low pass filter. (For details on the filter parameters, see
above.)
The gain control blocks (labelled with the attenuation, such as "0 dB" or "-10 dB") set the levels at which the low
pass filtered signals from each channel are mixed together. To set the gain, right-click on the box and use the
slider, or type directly into the entry box. Then click
Close
. To turn off low frequency mixing for a channel, simply
click on the gain control box to set it to
Off
.
