mi niDSP Ltd, Hong Kong /
/ Features and speci fi cations subject to change wi thout pri or noti ce
29
Note that the mix levels for the speaker channels are normally set 10 dB lower than the LFE channel—see the
application note
Bass Management with the nanoAVR
for full details.
The
Routing
screen provides the output from the LFE Mgt tab as the bottom row. By default, the summed,
filtered bass signal will be sent to the subwoofer channel , as shown below. The direct LFE input signal is
not
sent
to the subwoofer on this screen, as it has already been mixed into the
LFE Mgt
signal:
The
Xover
blocks on the
Output
screen must also be used to create matching high pass filters for each speaker
channel. For a full set of instructions on how to use bass management, see the application note
3.6
C
HANNEL MODE
The number of audio channels that the nanoAVR signals on its HDMI output to the downstream HDMI device is
selected by the
Channel Mode
dropdown selector:
