mi niDSP Ltd, Hong Kong /
/ Features and speci fi cations subject to change wi thout pri or noti ce
18
3.1
C
ONNECTING TO THE NANO
AVR
Communication with the nanoAVR can take place either over USB or Ethernet.
3.1.1
USB
Ensure that the computer is connected to the nanoAVR by a USB 2.0 port (see
above).
Then click on the Connect button:
3.1.2
Ethernet
Connect the nanoAVR to your local area network by plugging in the Ethernet cable. The following dialog will
appear:
Click on
Connect
to proceed.
3.1.3
Options
The first time you connect, or if you have made any changes to any data in the user interface, the following
dialog box will appear. It is recommended that the
first
time you connect, use
Restore Config
to ensure a known
starting state. Thereafter, use
Synchronize Config
.
