mi niDSP Ltd, Hong Kong /
/ Features and speci fi cations subject to change wi thout pri or noti ce
45
9.
Click the
Erase-Program-Verify
button. The progress bar will update. After some time, the status will
update to show successful completion.
DO NOT DISCONNECT THE USB CABLE OR POWER FROM THE NANOAVR WHILE THIS IS IN
PROGRESS. DOING SO MAY “BRICK” YOUR NANOAVR.
10.
Click the
Run Application
button to reboot the nanoAVR.
11.
Click the
Disconnect
button
12.
Close the
PIC32 Bootloader
program window.
6.4
O
BTAINING
S
UPPORT
1.
Check the forums on miniDSP.com to see if this issue has already been raised and a solution or solutions
provided.
2.
Contact miniDSP via the support portal at
with:
a.
The specific product you are having an issue with (in this case, nanoAVR HD or nanoAVR HDA).
b.
A clear explanation of the symptoms you are seeing.
c.
A description of the troubleshooting steps (see
above) you performed and the results
obtained.
