miniDSP Ltd – Hong Kong / Email :
info@minidsp.com
/ Features and Specifications are subject to change without prior notice
P 13
4.1.7.1
Custom Label
The custom label feature allows you to input a user defined label for each output channels: A handy feature to remember the output
configuration of your system.
4.1.7.2
Monitor
Allows you to monitor the input meter of that specific channel on a RMS meter. Note that the information is shown in dBFS
4.1.7.3
Output volume
A fader control for 0 to -70dB digital gain control. Similar to the input volume control.
4.1.7.4
Crossover (IIR)
Controls for the Low& High pass filters are available when clicking on the Xover (crossover) button:
The log scale graph gives you the equivalent response of the applied filter. By pointing the mouse anywhere on the plotted curve, the
dB attenuation and respective frequency are displayed.
Cut off frequency: Select the -3dB frequency by either entering the value or using the up & down arrows of the numeric
box.
Filter types:
o
Linkwitz Riley (LR): Available in 12, 24, 48dB/oct
o
Butterworth (BW): Available in 6, 12, 18, 24, 30, 36, 42, 48dB/oct
o
Bessel: Available in 12dB/oct
Custom label
Monitor
Output volume
Crossover control
Mute
Polarity Control
Compressor/Limiter
Output delay
Linking Features
Low Pass Filter
settings
High Pass Filter
settings
Master volume
control
