miniDSP Ltd – Hong Kong / Email :
info@minidsp.com
/ Features and Specifications are subject to change without prior notice
P 18
5
Technical Specifications
Item
Description
Digital Signal Processor
32bit Floating point Analog Devices SHARC ADSP21369 / 333MHz
Control
Driverless USB 2.0 control interface for Windows/Mac OS x environments
A computer is only required for the initial configuration.
Digital Audio inputs
Digital audio source selectable from IR remote or Front panel:
- AES-EBU on Neutrik 3pin female XLR / Isolated with digital audio transformer
- SPDIF on RCA connector / Isolated with digital audio transformer
- Toslink on Optical connector
The input signal is processed by a high quality onboard Asynchronous Sample
Rate Converter for compatibility with most common sample rate (20-216kHz)
Analog Audio outputs
- Fully balanced audio on Balanced Neutrik XLR connector
- ESS DAC 9023 with 112dB SNR
- Max output: 2Vrms
Sample rate / Resolution
Resolution: 32bit
Sample rate: Depends on selected plug-in. Please consult plug-in datasheet for
more information on the operating sample rate of the DSP
Template FIR filter capabilities
(Important note: FIR capabilities are controlled by
the plug-in used and not the hardware itself).
Mono signal: FIR filter with up to 12228 taps @48kHz, 6144 @ 96kHz
Stereo signal: FIR filter with up to 6144 taps/ch @48kHz
Please consult the plug-in specs for more info.
FIR filter storage
FIR taps coefficients & DSP configuration automatically loaded at bootup
USB port
USB port type B for real time control and firmware upgrade
Power supply
5VDC single supply / 600mA @ 5V - 2.1 round plug
Dimensions (H x W x D) mm
52 x 180 x 200mm
