5.1.2.FILLING THE WATER TANK
1. Remove the water tank lid (A), pulling it up carefully as shown.
2. Open the water tank (C) turning the cap (B) anticlockwise.
3. Fill the tank (C) with water required using the blender jug.
4. Close the water tank turning the cap (B) clockwise.
5. Fit the lid (A) on to the tank (C) matching the tank nozzle relief with the lid notch and carefully press the lid down.
1
2
3
4
5
Water
A
A
B
B
C
C
C
en