miniland baby everywhere Ipcam, Manual

4

5

IOS (iPhone/iPad)

Android

5. INSTRUCTIONS FOR USE

5.1. SET UP

Connect the camera with the adapter, and the ON LED (page 4, part 5) will light up.

Connect one end of the network cable provided to the network connector of the 

camera (page 4, part 7) and the other end to a network connector on your router. 

You only need to do this for the first time and does not need to be done for additional 

smartphone or tablet devices.

It will only be necessary to repeat this step when you connect the camera for

the first time to a new router or when you turn off your router.

Note: 

Ensure you have wi-fi enabled on your smartphone or tablet otherwise you may 

be connecting to the IPcam via your mobile provider which could incur data costs.

5.1.3. eMyBaby APP

In order to see your baby you will have to install our eMyBaby app 

on your smartphone (Android/ iPhone) or tablet (Android / iPad). 

To do this, you will have to access the store on your device and search for the 

eMyBaby app or download it directly by scanning the QR code:

Once installed, register your app for free at http://emybaby.com/

Note:

 You will need to install the eMyBaby app on all devices you wish to use with the 

camera but you will not need to connect the camera again using the network cable. 

You will, however, need to register the camera with each new device (see sections 

5.2 

and

 5.2.1

).

5.1.2. INSERTING A MICRO SD MEMORY CARD 

In order to record the camera must also have a microSD memory card inserted (not 

included).

To insert the card, follow the steps below:

1- Turn off the camera.

2- Enter the microSD card in the corresponding slot (page4, part 11 ).

3- Connect the camera after inserting the card.

Once the card has been entered, it must be formatted so that the camera can record

on it (see section 5.2.2.5. FORMAT SD CARD).

App Store

Availabl e on the

App Store

Availabl e on the Androi d