English
5
. INSTRUCTIONS FOR USE
5.1. OPERATING INSTRUCTIONS
1. Place the humidifier horizontally in a suitable place.
2. Remove the water tank (1) from the unit base (3). Open the cap (2), fill the
water tank with water, close the cap, and place the water tank on the base
correctly.
3. If you wish to add essence, take out the aroma bottle (11) located on the
essence compartment (9) by twisting the bottle round, remove the aroma stick
(12), pour the essence (it is not included, any essence can be used) into the
bottle, put the stick back on the bottle and place the aroma bottle again on the
essence compartment by twisting the bottle round in the opposite direction.
4
. Connect the humidifier to the power supply, turn on the power switch (5) –
IMPORTANT! Never switch it on without water. The power indicator (6) will light
up in green and the humidifier will begin to work. Turn the mist setting knob (8)
to select the desired mist flow.
5. When the water level is insufficient, the power indicator (6) will flash in red.
When there is no water in the water tank the built-in safety device will
disconnect the atomization circuit automatically, then there is no output of steam
flow from the spray nozzle and the water depletion indicator is illuminated (two
colours on the same indicator). To continue operation, please turn off the power
and refill the water tank.
6. By pressing the night light button (7) you can turn the blue night light on / off.
NOTE:
·
In cold weather, windows and even some walls may mist up or be covered in
frost from excessive indoor humidity. If this occurs, reduce the mist intensity
setting to avoid damage from condensed water dripping on windowsills.
· Too much humidity in the room may allow moisture to accumulate on surfaces
where bacteria and fungi can grow. Collected moisture may also harm furnitur
2
3
ESSENCES
1
1
2
3
WATER