Thank you very much for purchasing Minimo ONE Series Ver. 2 MINI BELTSANDER.
This product is the Motor for Minitor Handpieces.Read carefully this instruction manual before
use.Also read carefully the instruction manuals of D.C. power pack, and of foot switch. Please
keep this instruction manual near the power pack for any operators to refer to whenever
operating this system.If you lost your instruction manual, download it from our website.
Introduction
1
2
■When replacing carbon brushes or others, pull out the power cord.
○Failure to do so could result in electric shock and/or failure.
●Read the precautions below to ensure safe use and handling. These precautions are intended to
protect you and others around you. Read and follow them carefully to avoid injury, damage to the
product or damage to property.
●Read carefully the instruction manual of this power pack, handpieces and foot switch.
●Keep this instruction manual near the power pack for any operators to refer to whenever operating
this system.
■ About Warning and Caution
Safety instructions are classified as Warning and Caution in accordance with the seriousness of the risk.
Warning
Caution
■ About Symbols
This symbol denotes that an instruction must
be obeyed at all times.
This symbol denotes that the action is prohibited.
The symbols below have the following meanings.
Cautions for handling and operation
This indicates that incorrect
operation presents significant
danger of accident, resulting in
death or serious injury to users.
This indicates that incorrect
operation presents possibility of
injury to users or damage to the
unit.
Caution
■Use the power pack in a place without condensation.
○Failure to do so could result in fire, electric shock, and/or failure.
■Do not use in a place with corrosive gas such as chlorine gas, hydrogen sulfide, and/or sulfurous acid gas.
○Failure to do so could result in fire, electric shock, and/or failure.
■Do not drop and/or hit.
○Failure to do so could result in malfunction and/or failure.
■Do not use in a place near machines remarkably emitting electric noise.
○Failure to do so could result in malfunction and/or failure.
■Use in temperature between 0 - 40℃.
○Failure to do so could result in malfunction and/or failure.
■For maintenance, unplug the power cord for safety.
○Failure to do so could result in electric shock and/or failure.
■For disposal of this power pack, please follow your local city office or the shop where you purchased the product.
■Do not allow children to use this product. Also, keep away from children.
■Be careful for dust, oil, water not to enter the inside of the power pack.
If entering, turn off the main switch and unplug the power cord. Then, ask us for repair.
○Failure to do so could result in fire, electric shock, and/or failure.
■When you leave the workshop, turn off the main switch, and unplug the power cord from the outlet for safety.
Warning
■Do not modify and/or disassemble the power pack.
○Failure to do so could result in fire, electric shock, and/or failure.
○Also this may have a significant impact on its safety and performance.
■Always ask us for repair.
○Failure to do so could result in fire, electric shock, and/or failure.
○Also this may have a significant impact on its safety and performance.
■In case of abnormal noise, smoke, and/or bad smell, turn off the main power and unplug the power cord.
○Failure to do so could result in fire and/or electric shock.
■Make sure whether or not the handpiece runs after switching on.
If the handpiece does not run after switching on, stop using it.
○Failure to do so could cause the motor to be overheated, resulting in fire or failure.
■Do not use a damaged curl cord.
○Failure to do so could result in fire, electric shock, and/or failure.
■When connecting this handpiece with a powerpack, always turn off the main switch of the powerpack.
○Failure to do so could result in fire, electric shock, and/or failure.
■When turning on the motor switch, firmly hold the handpiece.
○Failure to do so could make the handpiece hop, resulting in injury to the user or damage to the tool.
■Commutation sparks occur while the motor is running.
So, do not use near inflammable and/or explosive substances such as thinner and/or gasoline.
○Failure to do so could result in fire and/or failure.
■Do not touch the Belt and pulley while the motor is running.
○Failure to do so could result in injury to the user or damage to the tool.
Warning
■Always wear safety glasses and a mask for dust.
○Chips and/or dust left after grinding/polishing process could result in unexpected injury.
