MINIMOTO
™
GO KART
HOW TO RIDE YOUR MINIMO-
TO™ GO KART: (Cond’t)
10) Move the Control
switch to either training
mode or normal mode.
(Fig. 21)
IMPORTANT:
It is
suggested that ANY
first time driver use TRAINING MODE first to
get familiar with the vehicle. This mode will
limit the speed to about
1
/
2
of the true poten-
tial. Once the driver is familiar with the oper-
ation of the vehicle, they can select the
faster normal mode.
11) Put the switch on the Steering Wheel to
the ON position.
12) Put the FWD/REV switch to the FWD
position.
13) Wait one
second then
step on the
accelerator
pedal (driver’s
right side
pedal). The
MINIMOTO™ GO KART should move forward. If
not, lift your foot from the pedals, wait one
second and try again. (Fig. 22)
14) The more you press on the accelerator
pedal, the faster the vehicle will go.
15) To stop,
press on the
brake pedal
(driver’s left
side). (Fig. 23)
TIP:
You do
not need to let
off of the accelerator when you press on the
brake. The power is automatically cut off to
the motor when the brake pedal is pressed.
This will help you conserve power and speed
when driving.
16)
BE CAREFUL:
The MINIMOTO™ GO
KART can reach speeds up to 18 MPH on a
level surface (depending on the surface ter-
rain and the weight of the rider).
16
Fig 21
Fig 22
Fig 23