MINIMOTO
™
GO KART
VEHICLE ASSEMBLY AND SET
UP:
CAUTION:
The included tools to set up and
charge the MINIMOTO™ GO KART should be
used by an ADULT ONLY. The package con-
tains some small parts. Keep away from
small children.
1) Completely remove the
MINIMOTO™ GO KART and all
contents from the package. (Fig.
1) Go-Kart x 1, front wing x 1,
seat back x 1, battery charger x
1, shut off “T” handle x 2,
instruction manual x 1, safety
flag x 1, tools kit set x 1,
spare fuse x 2.
2) Find and identify the follow-
ing tools and hardware. (Fig. 2)
3) Locate the brake pedal. Find
and remove the cardboard secu-
rity tag. Discard the tag after
removal.
4) Fold down the Steering Wheel
to the steering rack by tighten-
ing the hand knob. (Fig. 3)
5) Using a coin or large screw-
driver, turn the two locks (Fig.
4) on the battery box until they
are loose from the body.
Remove the battery box.
6) Snap the Seat Back into the slots in the
back of the seat (Fig. 5) and screw it into
place with allen key. (Fig. 6)
7) Locate the
battery connec-
tors and snap
them firmly
together (Fig.
7) . Replace the
battery box and
tighten the two
locks.
8) Unscrew the
FUSE holder
cap, inspect a
fuse had
installed,
replace with
spare fuse if
necessary and
replace the
cap. (Fig. 8)
9)
Important:
Make sure the
ON/OFF swith
on the steering
wheel is in the
OFF position.
Insert the
Power Shut-Off
“T” handle into
the hole just
behind the bat-
tery compart-
ment (Fig. 9) .
10) Attach the
front wing by
placing it on
the front
bumper posts.
(Fig. 10)
6
Fig 4
Fig 5
Fig 6
Fig 7
Fig 8
Fig 9
Fig 10
Fig 2
Fig 1
Fig 3
