MINIMOTO
™
MAXII BIKE
VEHICLE ASSEMBLY AND SET
UP:
CAUTION: The included tools to set up
and charge the MINIMOTO
TM
MAXII BIKE
should be used by an ADULT ONLY. The
package contains some small parts.
Keep away from small children.
1) Completely remove the MINIMOTO
TM
MAXII BIKE
from the
package.
Position it
upright and
support it by
moving the
kick stand to
the lower
position (Fig 1).
2) Find and
identify the
following tools
(Fig 2)
3) Rotate the two handlebars into position
(Fig 3). NOTE: Depending on the size and
driving position, rotate the handlebars
inward or outward. Moving them outward
will give you
more room
between your
knees and
your hands.
4) FIRMLY TIGHTEN the handlebars using
the tool as shown (Fig 4). WARNING: The
handlebars must not be able to move
when riding! ALWAYS test the handlebars
before riding to make sure they will not
slip, rotate, or be forced from their desired
position. If the handlebars move when rid-
ing, it is possible to loose control and fall.
Adjust or tighten the handlebars as neces-
sary.
5) Adjust the throttle by rotating the han-
dle grip into a comfortable position. Use
the Allen Key to release the screw (Fig 5).
Once the throttle is correctly adjusted, fas-
ten the screw back on using the Allen key.
Make sure the
throttle is firm-
ly in place
when finished.
6
Fig 1
Fig 2
Fig 3
Fig 4
Fig 5
