MINIMOTO
™
HYBRID
19
REPLACING THE BATTERY:
1)
Remove the Key from the Lock
2)
Remove all
bolts from the
main body.
(Fig.
19)
3)
Carefully sepa-
rate the right and
left main body off of the frame
NOTE:
Do
not remove it entirely from the bike — just lift
off and to the side.
4)
Unscrew and
loosen the battery
retainer.
(Fig. 20)
5)
Carefully discon-
nect the electrical
plug between the
battery and the
wiring harness.
(Fig. 21)
6)
Remove the bat-
tery.
7)
Reposition the battery in the location of
the old battery.
8)
Retighten the battery retainer so the
battery securely held. Reconnect the plugs.
9)
Replace main body, and seat in reverse
order
10)
Charge the new battery before attempt-
ing to ride again.
Non-rechargeable battery is not to be
charged.
Battery charging must be done by ADULTS only.
Only battery of the same or an equivalent type
as the recommended battery is to be used.
Use only Minimoto™ replacement batteries.
Battery is to be inserted with the correct polarity.
Remove old or dead battery from the
MINIMOTO™ HYBRID BIKE. If they do not accept
a charge.
Do not short-circuit the battery and the con-
nectors.
Fig 21
Fig 20
Fig 19
