<Fig. 10>
●
www.minisolarworld.com
6
MT-150 Assembling Guide
Mount the rotating body of Mini-Turbine on the
base body.
Put the pivot (aluminum pipe) on the iron ball in the
central hole of base body.
9
<Fig. 9>
<Fig. 12>
Joint two aluminum pipes (pillars,
7mm diameter, component #9).
Two aluminum pipes to the holes at
the edge sides of the roof
(component #1).
They are the pillars of Mini-Turbine,
MT-150.
10
<Fig. 11>
<Fig. 11-1>
Joint the complex of the roof and
the pillars to the base body.
Hold the pillars by both hands and
put down to the holes at the base
body. Watch the pivot to meet the
hole in the center of roof.
Refer to <Fig. 11> and <Fig. 11-1>.
※ Slap slightly the top of the roof
to fix well.
11
Check the turbine rotates easily.
▶ Problem shooting when it jammed.
- Check the ball is in the hole of base boby
- Check the pillars stand strait
- Check the space between the magnets
and base body.
12
<Fig. 10-1>
<Fig. 10-2>
The Roof with Aluminum Pipes (Pillars)
↓
↓
↓
Summary of Contents for MT-150
Page 8: ...www minisolarworld com ...
