background image

Date Purchased                                     Store Purchased                                   Model Number                                    Serial Number 

F900

           This warranty shall not apply to fans which have been damaged in any way, including improper installation, damage as a result of the removal 
of the fan from the origial installation, or damage in shipping. This warranty shall not apply to fans which have been subjected to use for which the 
fan was not designed. The purchaser of the fan shall be responsible for any cost of removing the old fan, installing a new fan, or any other costs.
           This limited warranty is in lieu of all other express warranties. This limited warranty excludes all incidental and consequential damages, and 
Minka-Aire  shall not under any circumstances be liable for incidental or consequential damages. Some States do not allow the exclusion of or 
limitation of incidental or consequential damages, so the foregoing limitation or exclusion may not apply to you.
           This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. We encourage you to promptly 
complete and return the enclosed warranty registration card. However, return of the warranty registration card is not a condition of this warranty.

R

Summary of Contents for Cristafano





























Reviews: