Step 1. Insert Receiver into Hanger Bracket with the flat side of the Receiver facing the ceiling. (Fig. 13)
Step 2. Motor to Receiver Electrical Connections: Be sure to snap together the 2-PIN and 4-PIN connectors, the male plug from the receiver and
female plug from the fan. (Fig. 14)
Step 3. Receiver to House Supply Wires Electrical Connections: Connect the WHITE wire (Neutral) from the outlet box to the WHITE wire marked "AC
in N" from the receiver. Connect the BLACK wire (Hot) from the outlet box to the BLACK wire marked "AC in L" from the receiver. Secure all wire
connections with the plastic wire nuts provided. (Fig. 14)
Step 4. If your outlet box has a GROUND wire (Green or Bare Copper) connect this wire to the Hanger Ball, Hanger Bracket and Receiver Ground
wires. If your outlet box does not have a Ground Wire, then connect the Hanger Ball, Hanger Bracket and Receiver Ground Wires together. Secure
wire connection with the plastic wire nut provided. (Fig. 14)
After all splices are made, check to make sure there are no loose strands. As an additional precaution we suggest to secure the plastic wire
connectors to the wires with electrical tape.
NOTE: Fan must be installed from a maximum distance of 40 feet from the transmitting unit for proper signal transmission between the
transmitting unit and the fan's receiving unit.
