6
Fig. 12
WARNING! HOOK UP "IN SERIES" ONLY. DO NOT CONNECT NEUTRAL SUPPLY WIRE
OF ELECTRIC CIRCUIT TO THE WALL SWITCH, DAMAGE TO THE WALL SWITCH AND
POSSIBLE FIRE COULD OCCUR.
Step 1. Make the electrical connections as shown in Fig.11. If your outlet box has a ground
wire (Green or Bare Copper) connect the wall control's ground wire directly to one of the
screws from the outlet box. Secure all wire connections with the plastic wire nuts
provided.
Step 2. Carefully tuck the wire connections inside the outlet box. Use the screws provided
to secure the wall control and wall plate to the outlet box. (Fig. 12)
INSTALLING THE WALL CONTROL
