Installing Printer Drivers and Software
47
The factory default router address is 000.000.000.000. This setting provides auto-
matic sensing of gateways. If you identify a subnet mask, automatic sensing is dis-
abled.
3
If necessary, in the Administration/Communications/Resident NIC/CrownNet/
TCPIP/Subnet Mask menu, enter the printer’s subnet mask.
The default subnet mask is 000.000.000.000.
4
Log on the system as administrator.
5
Edit the system host table by adding the following line to the \windows\hosts file:
internetaddress hostname
where internetaddress is the Internet address of the printer (Administration/Commu-
nications/Resident NIC/CrownNet/TCPIP/Internet Address menu, and hostname is
the descriptive name of the printer.
Network Configuration
This assumes that an NDPS broker object and an NDPS manager object are already
created. If not, see instructions on page 44.
1
From your browser’s Object menu for the Organization or Organizational unit,
select Create.
2
In the New Object dialog box, select NDPS Printer.
3
In the Create NDPS Printer dialog box. type the name of your printer in the Printer
Name field.
4
At the Printer Agent Source field, select Create a New Printer Agent and
click Create.
5
Browse to select the NDPS Manager you want to assign it to.
6
At the Gateway Types window, select the Novell gateway and click OK.
7
In the Novell PDS dialog box, configure the Novell PDS by selecting the Printer
Type and Port Handler Type and click OK.
The Configure Novell Port Handler Wizard appears.
8
Configure the Connection Type as Remote (LPR on IP) and click Next.
