Minolta 505 2 Manual Download | Manualshive

Page: 19 / 24

background image

85

84

ACCESSORY INFORMATION

When using an accessory flash, the desired flash mode can be
selected using the camera or the flash.

Accessory Flash Control

CAMERA

Press the flash-mode button and
turn the control dial to select the
desired flash mode.

• The camera transfers data to the

accessory flash immediately.

FLASH

Press the flash’s ON/OFF button
to select the desired flash mode.

• Data is not transferred from the flash until

the shutter-release button is pressed
partway down.

• Fill flash cannot be selected when the

camera is set to Full-Auto or any of the
Subject Program modes.

ACCESSORY INFORMATION

This camera is designed to work specifically with lenses and
accessories manufactured and distributed by Minolta. Using
incompatible accessories with this camera may result in
unsatisfactory performance or damage the camera and accessories.

Lenses

• All Minolta AF lenses can be used with this camera.
• MD and MC series lenses (manual focus) cannot be used with

this camera.

Compatibility of Accessories

Flashes

• All Minolta i, si, and HS series flash units, and the Vectis SF-1

flash, are compatible with this camera. The flash will always fire
when the flash unit is on. (Unless Custom Function #5 is set to
Autoflash (setting 1). In this case, the flash will fire only when
necessary when it is on and the camera is in Full-Auto and
Subject Program modes.)

• The Flash Shoe Adapter FS-1100 is required to mount AF series

flash units (4000AF, 2800AF, 1800AF, and Macro flash 1200AF).

• When the FS-1100 is used…

- The flash will fire every time the shutter is released.
- The AF illuminator will not activate.
- The built-in flash is set to fill flash when the accessory flash is

removed.

• X-series flashes and flashes sold by other manufacturers cannot

be used with this camera.

Others

• The following accessories are not compatible with this camera:

Control Grip CG-1000

Data Receiver DR-1000

Creative Expansion Cards

Anglefinder

Magnifier

Wireless Controller IR-1N

* Permanent damage will occur if the Wireless Controller IR-1N

is used with this camera.

«
...
17
18
19
20
21
...
»

Summary of Contents for 505 2

























Reviews:

No comments

Related manuals for 505 2

DCS-1110 - Network Camera

Brand: D-Link Pages: 16

Brand: Okina USA Pages: 3

Brand: Okina USA Pages: 16

Brand: Olympus Pages: 84

Brand: Olympus Pages: 83

Brand: Panasonic Pages: 24

NO FOUND VFD725W-50P

Brand: ViewSonic Pages: 35

Brand: Connect Pages: 14

MOBILE PHOTO DISPLAY S4 PDS040

Brand: JOBO Pages: 8

GigE uEye CP Rev. 2

Brand: IDS Pages: 23

Brand: Vosonic Pages: 31

Brand: Kaya Instruments Pages: 49

Brand: Panasonic Pages: 61

Brand: Panasonic Pages: 311

Brand: Panasonic Pages: 41

Brand: CHINON Pages: 16

Brand: Argus Pages: 1

Brand: Argus Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands