background image

27

26

LOADING FILM

Your camera uses IX240 type film designed for use in
Advanced Photo System cameras.

•Your camera has an automatic transport system which loads

the film, sets the film speed, and advances the film after each
exposure.

•Once loaded, the Film Chamber Lock feature prevents the film

chamber from being opened until the film is rewound into the
cassette.

•There is no need to worry about double exposure. The DEP

(Double Exposure Prevention) feature prevents the camera
from accepting exposed film.

Visual Exposure Indicators

•The current VEI has a white indicator behind it.
•This camera can load film with either the 

or 

VEI current.

VEI

MEANING
UNEXPOSED
PARTIALLY EXPOSED
EXPOSED
PROCESSED

Loading the Film

Use IX240 type film designed for use in Advanced Photo
System cameras. Your camera will automatically set the
proper film speed for the film you are using.

2. Press the film-chamber

release on the back of the
camera. The film-chamber
door will open.

3. Insert the new film

cassette into the film
chamber with the VEI on
top.

4. Close the film-chamber

door.

1. Press the main switch to

turn the camera on.

•Film can be loaded when the

camera is on or off.

•Only partially-exposed film (VEI  ) rewound in Minolta

cameras with Mid Roll Change capability can be loaded in this
camera.

Summary of Contents for APS Camera


























































Reviews: