background image

39

38

FOCUS HOLD

Use focus hold when you want
to take a picture with your
subject outside the focus 
frame [  ], or when autofocus is
difficult to confirm.

1. Center your subject in

the focus frame [  ] and
press the shutter-release
button partway down.

2. Continue to hold the

shutter-release button
partway down while you
compose your picture.

3. Press the shutter-release

button all-the-way down
to take the picture.

•Focus hold can only be used when 

appears in the

viewfinder.

DIRECT MANUAL FOCUS

Use DMF to adjust the focus manually without taking the
camera out of autofocus mode.

1. Press the shutter-release button partway down to

activate autofocus (camera must be in AF mode).

2. Without releasing the

shutter-release button
adjust the focus
manually using the
focusing ring on the lens.

will appear in the

viewfinder.

3. Press the shutter-release button all-the-way down to

take the picture.

•The focus-confirmed indicator (

)

will appear in the

viewfinder to indicate when the subject in the focus frame is in
focus.

•The camera returns to the autofocus mode after the picture is

taken, or when you remove your finger from the shutter-
release button.

•DMF is not available on lenses without a focusing ring.
•DMF is not possible if 

or 

appear in the viewfinder.

Summary of Contents for APS Camera


























































Reviews: