Sending Faxes
4
Di 150f
4-67
4.3
Transmission Methods
Memory Transmission
Memory transmission is set as a default. You should send faxes in direct
mode only exceptionally, e.g. if not enough memory is available. Since
your fax machine is a multi-tasking device it is possible to scan documents
while your Minoltafax is sending from memory, receiving or printing. As
soon as the current operation is finished the new document will be sent.
Memory transmission offers several advantages. To set memory
transmission as default, proceed as follows:
Description
Display
1
Press
PROGRAM, J, 1, 2
and
EN-
TER
.
2
Select the desired setting using
the arrow keys and press
ENTER.
If you have set memory transmission as default, you can turn it on for the
actual transmission by pressing
MEMORY TRANSMIT
on the panel.
Note
If the memory is exhausted during scanning the document will be de-
leted from the memory. You should wait until enough memory capacity
to scan all documents completely is available again. If this is not pos-
sible, switch to direct mode.
In case of a power failure documents will be stored in the memory for 1
hour.
Direct Transmission
You can send directly from the ADF, if not enough memory is available to
scan all documents you want to transmit. Make sure you have switched
off
MEMORY TRANSMIT
before. Direct transmission from the flatbed
scanner is not possible.
10.Lck.No.
13.Stamp
11.Service Mod.
14.RelayedRelais
12.Memory Tx
15.PC Connect.
Enter
Ä
Ä
Memory Tx
ON
OFF
Enter
Ä
Ä
Summary of Contents for Di150f
