7
Troubleshooting
7-2
Di470
The copy is blurry.
The paper is damp.
Replace the paper.
The image is
uneven.
The entire surface of the
original glass is dirty.
Clean the original glass,
see page 8-1.
The original pad is dirty.
Clean the original pad, see
page 8-1.
The original is very thin or
highly transparent.
Place a blank sheet of paper
over the original.
The original is 2-sided.
Manually set the exposure
to a lighter level, see
page 4-62.
The edge of the
copy is dirty.
The original pad is dirty.
Clean the original pad, see
page 8-1.
The original is not placed in
the correct position.
Place the original on the
original glass correctly, see
page 3-13.
The copy paper size is
larger than the original.
Select the same copy paper
size as the original.
The zoom factor selected is
not correct for the copy
paper size.
Select a suitable zoom
factor for the copy paper
size, see page 4-11.
The copy is badly
aligned.
The original is not placed in
the correct position.
Place the original on the
original glass correctly, see
page 3-13.
Place the original in the
document feeder correctly,
see page 3-8.
The original is not suitable
for the document feeder.
Place the original on the
original glass, see
page 3-13.
The entire surface of the
original glass is dirty.
(When using the automatic
document feeder)
Clean the original glass, see
page 8-1.
Symptom
Possible cause
Action
Summary of Contents for Di470
Page 1: ...The essentials of imaging www minoltaeurope com Advanced Information Di470 ...
Page 2: ......
Page 10: ...Di470 ...