Getting to Know Your System
2
Di551/Di650
2-25
Installation Site
The installation site must meet the following requirements:
G
an area that is dry and free of dust
G
a level surface free of undue vibrations
G
provision for good ventilation
G
a location away from curtains or other easily-inflammable materials
G
away from personnel so that no one is subjected to the direct exhaust
air of the system.
The system must be protected from the following influences:
G
splashing liquids
G
direct sunlight
G
strong temperature fluctuations
G
direct air flow from heating or air conditioning units.
CAUTION
External influences can cause damage to the system!
The main tray of the finisher lowers during the output cycle.
Objects located under the main tray can damage the main tray.
➜
Do not put any objects under the main tray of the finisher.
Space Required for System
CAUTION
Device damage by incorrect assessment of space requirements
Always ensure sufficient free space around the system. Too little space
can cause damage to the system, for example from overheating.
Furthermore operation is hindered by too little free space.
➜
Leave sufficient space between the back of the device and the wall to
ensure adequate ventilation.
➜
Do not put any objects under the main tray of the finisher. The main
tray lowers during the output cycle. Objects located under the main
tray can cause serious damage to the main tray.
Summary of Contents for Di551
